Inspection & Processing Services

The following is a list of our current services. For services not listed, don't hesitate to contact us for a special setup or referal to another vendor who performs the service.

  • Magnetic Particle Inspection
    • AC and DC Magnetization
    • Raw Material, New Manufacture Hardware and Overhaul
    • In-Process and Final Inspection
    • Pre and Post Inspection Cleaning
    • Re-Work and Re-Inspection Available On Premise
  • Liquid Penetrant Inspection
    • Fluorescent Water Washable, Fluorescent Post-Emulsified Hydrophilic, Fluorescent Post-Emulsified Lipophillic, Fluorescent Solvent Removable, Visible Dye Water Washable, Visible Dye Solvent Removable
    • Raw Material, New Manufacture Hardware and Overhaul
    • In-Process and Final Inspection
    • Pre-Penetrant Etching
    • Re-Work and Re-Inspection Available On Premise
  • Etching and Pickling
    • Nitro-Pickle
    • Acid Etching
    • Caustic Etching
    • De-Oxidizing
  • Abrasive Cleaning – Descaling
    • Aluminum Oxide
    • Glass Bead
  • Passivation
    • Alkaline Cleaning
    • Solvent Cleaning
    • Type II Solution
    • Type VI Solution
    • Dichromate Seal
  • Passivation Testing
    • High Humidity Testing 24 Hours
    • Water Immersion Testing 24 Hours
    • Salt Spray Testing
    • Copper Sulfate Testing
    • Ferroxyl Testing
    • Done In Communication With Passivation
  • Chemical Conversion Coating
    • Class 1A and Class 3
    • Gold and Clear
    • Final Finish
    • Prior to Paint
  • Coatings
    • Primer
    • Polyurethane Topcoat
    • Epoxy Enamel Topcoat
 
 

[SERVICES] [APPROVALS] [GENERAL INFO.] [CONTACT US] [HOMEPAGE]

Golden State Magnetic & Penetrant
Magnetic Particle & Liquid Penetrant Inspection Services
9301 Laurel Canyon Blvd. • Arleta, CA 91331
(818) 767-5767 • Fax (818) 767-5885 • Email: info@gsmp.com